Design of Power Supply for RGB LED Based Lamp Source

  • Authors

    • Divya Shetty
    • Smit Dave
    • Siddhant Shah
    2018-12-19
    https://doi.org/10.14419/ijet.v7i4.41.24300
  • RGB LEDs, Dimming, Push Pull Converter, Voltage Mode control.
  • LED lighting is replacing the conventional lighting system at a very fast pace. RGB LED lighting fixtures offer convenient options of color changes to enhance our environment. The forward characteristics of Red, Green and Blue LED’s indicate the region of control to produce acceptable level of light intensities. As the intensity of light produced by an LED is proportional to its forward current, a suitable region is identified to obtain distinctive colors and to explore the energy saving options. The objective of the paper was to provide a suitable control for dimming in the linear region as well as in the nonlinear region of the diode graph. The RGB LEDs have been powered from three push pull converters. Different control methods have been explored and simulated in PSPICE to switch the LEDs as to produce distinctive colors. Every method seems to have its pros and cons. Eventually Voltage mode control is adopted to provide control over the entire region of the diode graph which includes both linear and nonlinear regions which will serve the purpose of dimming. Accordingly, a multi-colored lamp source using RGB LEDs has been designed and the hardware has been developed.

     

     

     
  • References

    1. [1] Laszlo Balogh, “Design and Application Guide for High Speed MOSFET Gate Drive Circuitsâ€, Texas Instruments

      [2] “Application Note: Thermal Management of Power LEDâ€, Dominant Semiconductors

      [3] “Thermal Managementâ€, CREE

      [4] Stephen Johnson, “LEDs-An Overview of the State of the Art in Technology and Applicationâ€, IEEE Transactions on Industry Applications, Vol: Ia-19, No: 5, September/October 1983

      [5] Abraham I. Pressman, “Switching Power Supply Designâ€, McGraw Hill, Second Edition, ISBN 0-07-116707-2

      [6] Arturas Zukauskas, Micheal S. Shur, Remis Gaska, “Introduction to Solid State Lightingâ€, Wiley-Interscience Publication, ISBN 0-471-21574-090000

      [7] Daniel W. Hart, “Introduction to Power Electronicsâ€, Prentice Hall International Editions, ISBN 0-13-180415-4

      [8] E Fred Schubert, “Light Emitting Diodesâ€, Cambridge University Press (June 2006), ISBN 978-0-5218-6538-8

      [9] L. Umanand, S. R. Bhat, “Design of Magnetic Components for Switched Mode Power Convertersâ€, New Age International (P) Limited, ISBN 81-224-0339-5

      [10] Ned Mohan, Tore M. Undeland and William P. Robbins, “Power Electronics- Converters, Applications, and Designâ€, John Wiley & Sons, Second Edition, ISBN 9971-51-177-0

      [11] Sameer Ram Pujari “Application of Push Pull Converter for RGB LED based Commercial Lighting Systemsâ€, PESC, MIT, M.Tech Thesis 2011

      [12] Ragasudha, “Design and Development of Energy Efficient Multicoloured LED Lamp Source Using RGB LED’sâ€, PESC, MIT, M.Tech Thesis 2010

      [13] Robert W. Erickson, “Fundamentals of Power Electronicsâ€, Springer Publications, Second Edition, ISBN 81-8128-363-5

      [14] Steve Winder, “Power Supplies LED for Drivingâ€, Elsevier Newness Publications, ISBN 978-0-7506-8341-8

  • Downloads

  • How to Cite

    Shetty, D., Dave, S., & Shah, S. (2018). Design of Power Supply for RGB LED Based Lamp Source. International Journal of Engineering & Technology, 7(4.41), 55-59. https://doi.org/10.14419/ijet.v7i4.41.24300