Justification of Characteristics of Operational-Functional Magnetic Control of Ferroprimes

  • Authors

    • A.A. Sandulyak
    • A.V. Sandulyak
    • V.A. Ershova
    • D.A. Sandulyak
    • M.N. Polismakova
    2018-12-01
    https://doi.org/10.14419/ijet.v7i4.36.22711

  • The model of operational-functional magnetic control of ferroimpurities is physically substantiated and implemented. In this research the relevant (consistent with the phenomenological) calculation formulas were obtained to determine the total mass of ferroimpurities (including the residual one) in the analyzed sample. In addition to the mass-operational characteristics of magnetic control, the corresponding total accumulative characteristics (including in a generalized form) were obtained and analyzed, confirming validity of the model used.

  • References

    1. [1] Sandulyak A.A., Polismakova M.N., Ershov D.V. Functional extrapolation of the mass-operational characteristic of magneto-phoresis as a basis for a precision method of ferro-particle control // Measurement Techniques, 2010, 53 (8), p.914-918.

      [2] Sandulyak A.A., Polismakova M.N., Kiselev D.O., Sandulyak D.A., Sandulyak A.V On limiting the volume fraction of particles in the disperse sample (for the tasks on controlling their magnetic properties) // Fine Chemical Technologies, 2017, 12(3), p.58-64.

      [3] Roylance B.J. Ferrography – then and now. Tribology International, 2005, 38, p.857-862.

      [4] Tandon N., Parey A. Condition Monitoring of Rotary Machines Condition Monitoring and Control for Intelligent Manufacturing // Springer Series in Advanced Manufacturing, 2006, p. 109-136.

      [5] Levy O., Elianz N. Failure Analysis and Condition Monitoring of an Open-Loop Oil System Using Ferrography // Tribology Letters, 2009, p.1-13.

      [6] Kirby D., Siegrist J., Kijanka G. Centrifugo-magnetophoretic particle separation // Microfluidics and Nanofluidics, 2012, 13 (6), p.899-908.

      [7] Sandulyak D.A., Sandulyak A.V., Shkatov P.N., Kononov M.A. Distinctive features of Express-Functional method of magnetic monitoring of ferroimpurities in fuels and lubricants // Chemistry and Technology of Fuels and Oils, 2016, 52 (5), p.550-558.

      [8] Sandulyak A.V., Fedotkin I.M. Magnetic iron removal of condensate // Moscow, Energoatomizdat, 1983, p.88

      [9] Sandulyak A. V., Kaczmarski V. Z., V. L. Dahnenko Patterns of deposition of iron impurities condensation in a magnetized ball nozzle // News of the USSR Academy of Sciences. Energy and transport, 1980, 8., p.56.

      [10] Sandulyak A. B., Kaczmarski V. V., Bartosiewicz R. D. Magnetic separation of iron-containing condensate from flokulirovannym particles // Chemistry and water technology, 1981, 3(1), p.74-77.

      [11] Ying, T.Y., S. Yiacoumi, and C. Tsouris, High-gradient magnetically seeded filtration. Chemical Engineering Science, 2000, 55(6), p. 1101-1113.

      [12] Tsouris С., Noonan J., Ying T.-Y. et al. Surfactant effects on the mechanism of particle capture in high-gradient magnetic filtration // Separation and Purification Technology. 2006, 51, p.201-209.

      [13] Alvaro A., Rodriguez J.M., Augusto P.A. et al. Magnetic filtration of an iron oxide aerosol by means of magnetizable grates // China Particuology, 2007, 5, p.140-144.

      [14] Xing Min, Longcang Shu, Wei Li et.al. Influence of particle distribution on filter coefficient in the initial stage of filtration // Korean Journal of Chemical Engineering, 2013, 30 (20), p.456-464.

      [15] Sandulyak A. V. Magnetic filtration purification of liquids and gases // Moscow, Chemistry, 1988, p.133 https://dlib.rsl.ru/viewer/01001440011#?page=136

      [16] Sandulyak A.A., Ershova V.A., Ershov D.V., Sandulyak A.V. On the properties "short" granular magnets with disordered chains of grains: a field between grains // Physics of the Solid State, 2010, Т.52 (10), р. 2108-2115.

      [17] Sandulyak A.V., Sandulyak A.A., Ershova V.A. Functional correction to the classical expression for the average flow velocity in a closely packed granular bed //
      Theoretical Foundations of Chemical Engineering, 2008, 42(2), p.220-224.

  • Downloads

  • How to Cite

    Sandulyak, A., Sandulyak, A., Ershova, V., Sandulyak, D., & Polismakova, M. (2018). Justification of Characteristics of Operational-Functional Magnetic Control of Ferroprimes. International Journal of Engineering & Technology, 7(4.36), 42-49. https://doi.org/10.14419/ijet.v7i4.36.22711