Titania-Coated Magnetite Particles for as(V) Removal from Water

  • Authors

    • Nisha Kumari Devaraj
    • Lokesh Srinath Ganapathe
    • Samer Riyad Elghazali
    • A. S.M. Mukter-Uz-Zaman
    • Wong Hin Yong
    2018-11-30
    https://doi.org/10.14419/ijet.v7i4.22.22185
  • As(V) Adsorption, Titania-Coated Magnetite Particles, Molybdenum-Blue Colorimeter Method, Stirring Time, UV-Vis characterisation.
  • Surface-modified magnetite (Fe3O4) particles are being proposed as adsorbents for arsenic (As) contaminated water due to its exploitable magnetic properties. In this study, magnetite particles were synthesised using co-precipitation method at various stirring times to obtain particles of different sizes. The particles were subsequently coated with titanium dioxide. Particle size analyser measurements indicated increase in the particles size with the increase in stirring time from 30 to 60 mins. Based on the X-ray diffractometer characterisation results, the obtained peaks were ascribed to that of magnetite. Titanium dioxide peaks were clearly evident for the titania-coated particles. The As(V) removal performance of the particles was tested using the low-cost molybdenum blue-based colorimeter method assisted by a UV-Vis spectroscopy. Prior to the testing, a calibration curve was obtained using As(V) sample solutions with different concentrations which depicted a linear relationship between the peak absorbance values and the concentration. Results indicated that all the titania-coated magnetite particles were able to remove 100% of As(V) in the tested solution for a contact time of 4 hours. The high affinity of the outer-titania shell towards As (V) ions may be beneficial to obtain an efficient adsorbent material for the removal of toxic As ions from water.

     

     


     
  • References

    1. [1] Shen YF, Tang J, Nie ZH, Wang YD, Ren Y & Zuo L (2009), Preparation and application of magnetic Fe 3 O 4 particles for wastewater purification. Separation and Purification Technology, vol. 68, issue 3, pp. 312-319.

      [2] Hu H, Wang Z, Pan L (2010), Synthesis of monodisperse Fe 3 O 4@ silica core–shell microspheres and their application for removal of heavy metal ions from water. Journal of Alloys and Compounds, vol. 492, issue 1, pp. 656-661.

      [3] Shen YF, Tang J, Nie ZH, Wang YD, Ren Y, Zuo L (2009), Tailoring size and structural distortion of Fe3O4 particles for the purification of contaminated water. Bioresource Technology, vol. 100, issue 18, pp. 4139-4146.

      [4] Arifin E, Cha J, Lee JK (2013), Simple and Efficient Synthesis of Iron Oxide-Coated Silica Gel Adsorbents for Arsenic Removal: Adsorption Isotherms and Kinetic Study. Bulletin of Korean Chemical Society, vol. 34, issue 8, pp. 2358-2366.

      [5] Rubel FJ (2003), Removal of Arsenic from Drinking Water by Adsorptive Media. USEPA.

      [6] Jha MK, Kumar V, Maharaj L, Singh R (2004), Studies on leaching and recycling of zinc from rayon waste sludge. Industrial and Engineering Chemistry Research, vol. 43, pp. 1284–1295.

      [7] Kentish SE, Stevens GW (2001), Innovations in separations technology for the recycling and re-use of liquid waste streams. Chemical Enineering Journal, vol. 84, pp. 149–159.

      [8] Jha MK, Upadhyay RR, Lee JC, Kumar V (2008), Treatment of rayon waste effluent for the removal of Zn and Ca using Indion BSR resin. Desalination, vol. 228, pp. 97–107.

      [9] Sun SH, Murray CB, Weller D, Folks L, Moser A (2000), Monodisperse FePt particles and ferromagnetic FePt nanocrystal superlattices. Science, vol. 287, pp. 1989–1992.

      [10] Xie J, Xu C, Kohler N, Hou Y, Sun SH (2007), Controlled PEGylation of monodisperse Fe3O4 particles for reduced non-specific uptake by macrophage cells. Advanced Materials, vol. 19, pp. 3163–3166.

      [11] Pankhurst QA, Connolly J, Jones SK, Dobson J (2003), Applications of magnetic particles in biomedicine. Journal of Physics D: Applied Physics, vol. 36, pp. R167–R181.

      [12] Ozkaya T, Toprak MS, Baykal A, Kavas H, Köseoğlu Y, Aktaş B (2009), Synthesis of Fe3O4 nanoparticles at 100°C and its magnetic characterization. Journal of Alloys and Compounds, vol. 472, pp. 18–23.

      [13] Chen J, Wang F, Huang K, Liu Y, Liu S (2009), Preparation of Fe3O4 nanoparticles with adjustable morphology. Journal of Alloys and Compounds, vol. 475, pp. 898-902.

      [14] Yan A, Liu X, Qiu G, Wu H, Yi R, Zhang N & Xu J (2008), Solvothermal synthesis and characterization of size-controlled Fe3O4 nanoparticles. Journal of Alloys and Compounds, vol. 458, pp. 487-491.

      [15] Wang J, Deng T & Dai Y (2005), Study on the processes and mechanism of the formation of Fe3O4 at low temperature. J Journal of Alloys and Compounds, vol. 390, pp. 127-132.

      [16] Sun SH & Zeng H (2002), Size-controlled synthesis of magnetite particles. Journal of the American Chemical Society., vol. 124, pp. 8204–8205.

      [17] Si S, Kotal A, Mandal TK, Giri S, Nakamura H & Kohara T (2004), Size-controlled synthesis of magnetite particles in the presence of polyelectrolytes. Chemistry of Materials, vol. 16, pp. 3489–3496.

      [18] Wan SR, Huang JS, Yan HS & Liu KL (2006), Size-controlled preparation of magnetite particles in the presence of graft copolymers. Journal of Materials Chemistry, vol. 16, pp. 298–303.

      [19] Rocher V, Siaugue JM, Cabuil V & Bee A (2008), Removal of organic dyes by magnetic alginate beads. Water Research, vol. 42, pp. 1290–1298.

      [20] Banerjee SS & Chen DH (2007), Fast removal of copper ions by gum arabic modified magnetic nano-adsorbent. Journal of Hazardous Materials, vol. 147, pp. 792–799.

      [21] Zhao X, Shi Y, Wang T, Cai Y & Jiang G (2008), Preparation of silica-magnetite nanoparticle mixed hemimicelle sorbents for extraction of several typical phenolic compounds from environmental water samples. Journal of Chromatography A, vol. 1188, pp. 140–147.

      [22] Li GY, Jiang YR, Huang KL, Ding, P & Chen J (2008), Preparation and properties of magnetic Fe3O4–chitosan nanoparticles. Journal of Alloys and Compounds, vol. 466, pp. 451–456.

      [23] Hong RY, Feng B, Liu G, Wang S, Li HZ, Ding JM, Zheng Y & Wei DG (2009), Preparation and characterization of Fe3O4/polystyrene composite particles via inverse emulsion polymerization. Journal of Alloys and Compounds, vol. 476, pp. 612–618.

      [24] Gupta SM & Tripathi M (2011), A review of TiO2 nanoparticles. Chinese Science Bulletin, vol. 56, issue 16, pp. 1639-1657.

      [25] Kim DK, Zhang Y, Voit W, Rao KV, Kehr J, Bjelke B & Muhammed M (2001), Superparamagnetic iron oxide nanoparticles for bio-medical applications. Scripta Materialia, vol. 44, pp. 1713–1717.

      [26] Solny T, Ptacek P, Bartonickova E, Davidsdottir S & Ambat R (2015), Preparation and TiO2 coating of nanosized magnetic particles. Presented at the Nanocon 2015, October 14-16.

      [27] Hu S, Lu J & Jing C (2012(, A novel colorimetric method for field arsenic speciation analysis. Journal of Enviromental Science, vol. 24, issue 7, pp. 1341-1346.

      [28] Rashad MM, Mohamed RM & El-Shall H (2008), Magnetic properties of nanocrystalline Sm-substituted CoFe2O4 synthesised by citrate precursor method. Journal of Materials Processing Technology, vol. 198, pp. 139-146.

      [29] Li Y, Zhang M, Guo M & Wang X (2009), Preparation and properties of a nano TiO2/Fe3O4 composite superparamagnetic photocatalyst. Rare Metals, vol. 28, issue 5, pp. 423-427.

      [30] Raj K & Viswanathan B (2009), Effect of surface area, pore vol. and particle size of P25 titania on the phase transformation of anatase to rutile. Journal of Physical Chemistry C, vol. 113, issue 31, pp. 13750-13757.

      [31] Devaraj NK, Ong BH & Matsumoto M (2008), Characterization of chemically prepared magnetite nanoparticles. Synthesis and Reactivity in Inorgorganic Metal-Organic Chemistry, vol. 38, issue 2, pp. 204-207.

      [32] Uttekar PS & Chopade VV (2017), Translocation of Cyclophosphamide by Using Multi-Walled Carbon Nanotubes Into Mammalian Cancer Cells. International Journal of Scientific Research in Science and Technology, vol. 10, issue 3, 121-136.

      [33] Wang G, Wang B, Park J, Yang J, Shen X & Yao J (2009), Synthesis of enhanced hydrophilic and hydrophobic graphene oxide nanosheets by a solvothermal method. Carbon, vol. 47, issue 1, pp. 68-72.

      [34] Yavuz CT, Mayo JT, William WY, Prakash A, Falkner JC, Yean S, Cong L, Shipley HJ, Kan A, Tomson M, Natelson D & Colvin VL (2006), Low-field magnetic separation of monodisperse Fe3O4 nanocrystals. Science, vol. 314, pp. 964-967.

      [35] Hyeon T (2003), Chemical synthesis of magnetic nanoparticles. Chemical Communications, vol. 8, pp. 927-934.

      [36] Manna B, Dasgupta M & Ghosh UC (2004), Crystalline hydrous titanium (IV) oxide (CHTO): an arsenic (III) scavenger from natural water. Journal of Water Supply: Research and Technology, vol. 53, issue7, pp. 483-495.

      [37] Li R, Yang W, Su Y, Li Q, Gao S & Shang JK (2014), Ionic potential: a general material criterion for the selection of highly efficient arsenic adsorbents. Journal of Materials Science and Technology, vol. 30, issue 10, pp. 949-953.

      [38] Guan X, Du J, Meng X, Sun Y, Sun B & Hu Q (2012), Application of titanium dioxide in arsenic removal from water: a review. Journal of Hazardous Materials, vol. 215, pp. 1-16.

  • Downloads

  • How to Cite

    Kumari Devaraj, N., Srinath Ganapathe, L., Riyad Elghazali, S., S.M. Mukter-Uz-Zaman, A., & Hin Yong, W. (2018). Titania-Coated Magnetite Particles for as(V) Removal from Water. International Journal of Engineering & Technology, 7(4.22), 31-35. https://doi.org/10.14419/ijet.v7i4.22.22185