A Fault Diagnosis Expert System for Commercial Bus Manufacturing process

  • Authors

    • Chee Nian
    • Tan .
    • Chee Fai
    • Tan .
    2018-08-01
    https://doi.org/10.14419/ijet.v7i3.17.16624
  • Bus, Expert System, Fault Diagnosis__
  • Bus manufacturing is one of the important assets in automotive industries as well as mode of public transportation. The design process is difficult and long throughout time. Moreover, there are many manuals, rules and regulation according to different standard which make the standardization and design process to be difficult and time consuming. Hence, this project describes the use of an expert system shell for commercial bus design. In bus manufacturing field, design of commercial bus is heavily depending on human experts. With the help of expert system, process of design commercial bus will be shortened up to 56.5% compared to conventional way. The developed system can be used as a training module for inexperienced personnel. In this research work, the fault diagnosis system was developed by using Kappa-PC expert system shell. It is supported by object orientated technology for the MS window environment. Lastly, the developed system will be validated with a case study to verify the capability of the developed system.

     

     

  • References

    1. [1] Roland Berger., 2016. Digitalization in the construction industry. Available at <https://www.rolandberger.com/.../tab_digitization_construction_industry_e_final.pdf> [Accessed on 27 November 2017]

      [2] Gemignani, M., C, Lakshmivarahan., S. & Wasserman. 1983. A.I, “ADVANCES IN COMPUTERSâ€.

      [3] Dym C. 1985. Expert systems: New approaches to computer aided engineering. J Eng Computer 1(3): 9 –25.

      [4] Terry Anthony Byrd. 1995. Expert systems implementation: interviews with knowledge engineers. Industrial Management & data systems 95(10): 3-7.

      [5] Xian, G and Zeng, B. 2009. An intelligent fault diagnosis method based on wavelet packer analysis and hybrid support vector machines. Expert Systems with Applications 36(10): 12131- 12136.

      [6] Deng, S., Lin, S., and Chang, W. 2011. Application of multiclass support vector machines for fault diagnosis of field air defence gun. Expert Systems with Applications 38(5): 6007- 6013.

      [7] Syiam, M. M. 2010. A neural network expert system for diagnosing eye diseases. Conference of the 10th International Conference on AI for Applications, San Antonia, Texas, pp. 491-492.

      [8] Wang, H. and Chen, Y., 2016. A robust fault detection and diagnosis strategy for multiple faults of VAV air handling units. Energy and Buildings, 127, pp. 442-451.

      [9] P. Jackson. 1998. Introduction to Expert System. Addison Wesley.

      [10] Catal, C., Sevim, U., and Diri, B. 2011. Practical development of an Eclipse-based software fault prediction using Naïve Bayes algorithm. Expert Systems with Applications, 38(3), 2347-2353.

      [11] Lei, Y., He, Z., and Zi, Y. 2011. EEMD method and WNN for fault diagnosis of locomotive roller bearing. Expert Systems with Applications 38(6): 7334- 7341.

      [12] Liebowitz, J. 1995. Implications for a Generic Expert Scheduling System Architecture and Toolkit. Expert Systems with Applications, 9(3): 423- 432 .

      [13] Rupnawar, A., Jagdale, A. and Navsupe, S., 2016. Study on Forward Chaining and Reverse Chaining in Expert System. International Journal of Advanced Engineering Research and Science, 3(12), pp. 60-62.

      [14] IntelliCorp. 2006. Kappa-PC User’s Guide. (Version 2.0, IntelliCorp, Inc., USA.)

      [15] Fiannaca, A., Rosa, M. L., Rizzo, R., Urso, A., and Gaglio, S., 2014. An expert system hybrid architecture to support experiment management. Expert Systems with Applications, 41(4), pp. 1609-1621.

      [16] Mansyur. R., Rahmat. R.A.O.K., & Ismail, A. 2013. A Prototype Rule-Based Expert System for Travel Demand Management. UNIMAS E-Journal of Civil Engineering 4 (4): 34–39.

      [17] C. K,, & Ercelebi. S. G. 2009 .An Expert System for Hydraulic Excavator and Truck Selection in Surface Mining. The Journal of the Southern Africian Institute of Mining and Metallurgy 109: 727-738.

      [18] Al-Ajlan, A., 2015. The Comparison between Forward and Backward Chaining. International Journal of Machine Learning and Computing, 5(2), pp. 106-113.

  • Downloads

  • How to Cite

    Nian, C., ., T., Fai, C., & ., T. (2018). A Fault Diagnosis Expert System for Commercial Bus Manufacturing process. International Journal of Engineering & Technology, 7(3.17), 64-70. https://doi.org/10.14419/ijet.v7i3.17.16624