Concurrent Engineering for Uppers Stream Process of Stamping Dies

  • Authors

    • Azman Senin
    • Zulkifli Mohd Nopiah
    • Ahmad Kamal Ariffin Mohd Ihsan
    • Shahrum Abdullah
    • Dzuraidah Abd Wahab
    • Ahmad Zakaria
    2018-08-01
    https://doi.org/10.14419/ijet.v7i3.17.16619
  • New product development, concurrent engineering, stamping simulation management, collaborative design

  • The new-product development process is very important to manufacturing companies in all the product being developed. The product being developed must meet all internal company processes, customer requirement and to be delivered at the planned time. The modern approach in new product development is concurrent engineering. This paper reviews the concurrent engineering development and practices in several countries and industry. An investigation on concurrent engineering approach to selected manufacturing companies were conducted and analyzed. Concurrent engineering implementation is moderate due to organizational, tools and communication barriers. Secondly, the use of digital tools such as Electronic Data Management/Computer Aided Engineering/Computer Integrated Manufacturing is low. To ensure the success of concurrent engineering for critical process in new product development such as stamping process, the stamped part accuracy and considerable processing timings are the key factors.

     

  • References

    1. [1] Adler, P. S., & Clark, K. B. (1991), Behind the learning curve: A sketch of the learning process. pp. 267 - 281.

      [2] ASTRA. (2007), Riding the rising tide: A 21st century strategy for U.S. competitiveness and prosperity. Washington, D.C.: ASTRA.

      [3] Barkley, B. T. (2007), Project Management in New Product Development. New York: Mc Graw Hill.

      [4] Clark, K. B., & Fujimoto, T. (1991), Product development performance: Strategy, organization, and management in the world auto industry. Boston: Harvard Business School Press.

      [5] Durmusoglu, S. S., & Barczak, G. (2011), The use of information technology tools in new product development phases: Analysis of effects on new product innovativeness, quality, and market performance. Industrial Marketing Management, pp. 321-330.

      [6] Firat, M. (2007), Computer aided analysis and design of sheet metal forming processes: Part III : Stamping die-face design. Materials and Design, pp. 1311 - 1320.

      [7] Love, P.E.D., Edwards, D.J., Irani, Z., Walker, D.H.T. (2009), Project pathogens: the anatomy of omission errors in construction and resource engineering project. IEEE Transactions on Engineering Management 56 (3), 425-435.

      [8] Fundamental of tool design. (1998), New York: Society of Manufacturing Engineers.

      [9] H. Hayashi, & T. Nakagawa (1994), Recent trends in sheet metals and their formability in manufacturing automotive panels. Journal of Material Processing Technology, pp. 455487.

      [10] H. Jo Hyeon, H. P. (1993), Principles of concurrent engineering. London: Chapman & Hall.

      [11] Hoffman, D. R. (1998), An overview of concurrent engineering. Proceedings Annual Reliability and Maintainability, pp. pp. 1 - 7. Dallas: IEEE.

      [12] Howard, L., & Lewis, H. (2003), The development of a database system to optimise manufacturing processes during design. Journal of Materials Processing Technology, pp. 374 - 382.

      [13] Huang, G. Q., Yee, W. Y., & Mak, K. L. (2003), Current practice of engineering change management in Hong Kong manufacturing industries. Journal of Materials Processing Technology, pp. 481-487.

      [14] J. David, P. A. Miguel, M. Ana and F. Santiago (2015), A review of concurrent engineering, Fascicle of Management and Technological Engineering. Issue #3: 94-97.

      [15] Kalkowska, J., Trzcielinki, S., & Wlodarkiewicz Klimer, H. (2005), Identification of concurrent engineering in Polish manufacturing companies - some results of pilot research. IEEE.

      [16] Katayama, T., Nakamachi, E., Nakamura, Y., Ohata, T., Morishita, Y., & Murase, H. (2004), Development of process design system for press forming: multi-objective optimization of intermediate die shape in transfer forming. Journal Material Processing Technology, pp. 1564-70.

      [17] Kayabashi, O., & Ekici, B. (2007), Automated design methodology for automobile side panel die using an effective optimization approach. Met Des.

      [18] Mohammad Z. Meybodi, (2013), "The links between lean manufacturing practices and concurrent engineering method of new product development: An empirical study", Benchmarking: An International Journal, Vol. 20 Issue: 3, pp.362-37

      [19] Mutisya, M., Steyn, J. L., & Sommerville, J. (2008), Concurrent Engineering and the Automotive Supplier Industry in South Africa, pp. 1265-1272. Cape Town: PICMET.

      [20] Nambisan, S. (2003), Information systems as a reference discipline for new product development. MIS Quarterly, pp. 1 - 18.

      [21] Pikosz, P., & Malmqvist, J. (1998), A comparative study of engineering change management in three swedish engineering companies. DETC. Atlanta, GA, USA.

      [22] Qian, Y., Goh, T. N., & Lin, J. (2015), Recent advances in concurrent engineering modeling. Proceedings of the 5th International Asia Conference on Industrial Engineering and Management Innovation (IEMI2014), 1(IEMI 2014), 9–13.

      [23] Ranky, P. (1994), Current/Simultaneous Engineering. CIMware.

      [24] Ruskin, P. (1994), Streamlining the product development process. 235(5), pp.18.

      [25] Salit, M. S. (2004), A study of concurrent engineering practices in Malaysia industries. Suranaree J. Sci. Technol., pp. 216-222.

      [26] Stach, R., Weber, F., Price, G., Pawar, K., Barson, R., & Ratchev, S. (2001), Implementation of Concurrent Engineering in Small and Medium Companies. Advances in Concurrent Engineering, pp.1–6.

      [27] Syan, C. (1999), Simultaneous engineering: methodologies and applications. Amsterdam: Overseas Publishers Association.

      [28] Tang, D. (2006), Agent-based System for Collaborative Stamping Part Design. Computer Supported Cooperative Work in Design, pp.1-6. CSCWD.

      [29] Taylor, L., & et. al. (1995), Numerical simulations of sheet-metal forming. Journal of Materials Processing Technology, 50(1-4), pp. 168-179.

      [30] Terwiesch, C., & Loch, C. H. (1999), Managing the process of engineering change orders: The case of the climate control system in automobile development. Journal of product innovation management, pp. 160-172.

      [31] Veness, P. J., Chidolue, G., & Medhat, S. S. (1996), Concurrent engineering infrastructure - Tools, technologies and methods in British industry. Engineering Management Journal, pp.1411-47.

      [32] Young, A. R., & Allen, N. (1996), Concurrent Engineering and Product Specification. Journal of Materials Processing Technology, pp. 181-186.

  • Downloads

  • How to Cite

    Senin, A., Mohd Nopiah, Z., Kamal Ariffin Mohd Ihsan, A., Abdullah, S., Abd Wahab, D., & Zakaria, A. (2018). Concurrent Engineering for Uppers Stream Process of Stamping Dies. International Journal of Engineering & Technology, 7(3.17), 31-37. https://doi.org/10.14419/ijet.v7i3.17.16619