3D-Forming and Autodesk Autocad at the Initial Stage of Engineering Training of Specialists in Technical Areas

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    Descriptive geometry is one of the disciplines that for a long time is the basis for training engineers of various specializations. However, with the advent of modern computer 3D technologies, the place and role in engineering of many traditional disciplines requires rethinking. The article is devoted to the integration of methods of descriptive geometry into the educational process of preparing students of higher educational institutions.

     


     

  • Keywords


    descriptive geometry, engineering graphics, computer modeling, 3D-model, drawing.

  • References


      [1] Monj G, Descriptive geometry, Translation by V.F. Gaze. Under the general wording of TP. Kravtsa // Publishing of the Academy Sciences, pp. 1947 – 291.

      [2] Kargin D.I., Monj G, (1974), the creator of descriptive geometry "Gaspar Monj", Collection of articles on the bicentennial Publishing of the Academy Sciences, Access:: http://www.detskiysad.ru/raznlit/monge2.html (Date of circulation 06.06.15).

      [3] Telegin, V., Kozlov, A, (2016), Computer realization of research into the dynamics of mechanical systems, IOP Conference Series: Materials Science and Engineering, Vol. 124, pp. 012101.

      [4] Telegin, I.V., Volodin, I.M., Zolotukhin, P.I, (2018), The mathematical modeling for assessing the effectiveness of hot forging extruded round in plan forgings on crank presses, International Journal of Engineering and Technology(UAE), pp. . 30-34.

      [5] Telegin, I., Kozlov, A., Zhirkov, A, (2017), Component simulation in problems of calculated model formation of automatic machine mechanisms, MATEC Web of Conferences, P. С. 03016.

      [6] Zolotukhin, P.I., Volodin, I.M., Karpaitis, E.P., Volodin, A.I., Schmidt, A.A, (2017), Study of the spring back of calibres in material forming processes of roll forging mills, Ironmaking and Steelmaking, pp. 1-5.

      [7] Kozlov, A.M., Kiryuschenko, E.V., Kozlov, A.A, (2017), Improving the efficiency of the milling process by reducing the oscillation of the technological system, MATEC Web of Conferences.

      [8] Telegin, V.V., Kozlov, A.M., Sakalo, V.I, (2017), Solid Modeling and Dynamic Analysis of Mechanisms of Press-forging Machines, Procedia Engineering, pp. 1258-1263.

      [9] Telegin, V.V., Telegin, I.V, (2014), Graphic preparation students on the basis of Autodesk software products, Modern problems of science and education, No. 3.

      [10] Telegin V.V., Telegin I.V, (2016), Graphic preparation of students. Engineering graphics and Autodesk Inventor, Modern high technology, No. 11-2.


 

View

Download

Article ID: 15187
 
DOI: 10.14419/ijet.v7i3.5.15187




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.