Conductivity and structural studies of PVA based mixed-ion composite polymer electrolytes

  • Authors

    • Sandeep Srivastava DEPARTMENT OF PHYSICS, FACULTY OF ENGINEERING & TECHNOLOGY, MANAV RACHNA INTERNATIONAL INSTITUTE OF RESEARCH AND STUDIES, FARIDABAD, HARYANA, INDIA
    • Pradeep K. Varshney DEPARTMENT OF CHEMISTRY, FACULTY OF ENGINEERING & TECHNOLOGY, MANAV RACHNA INTERNATIONAL INSTITUTE OF RESEARCH AND STUDIES, FARIDABAD, HARYANA, INDIA
    2018-06-01
    https://doi.org/10.14419/ijet.v7i2.12423
  • FTIR, Ionic Conductivity, Mixed-Ion Composite Polymer Electrolyte, XRD.
  • The solid membranes having different ratios of poly-vinyl alcohol (PVA), sodium perchlorate (NaClO4) and lithium perchlorate (LiClO4) were prepared using solution casting technique. The mixed-ion composite polymer electrolytes were characterized by X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR) and conductivity measurement investigations. The XRD study confirms the amorphous nature of the mixed-ion composite polymer electrolytes. FTIR analysis has been used to characterize the structure of polymer which confirms the polymer and salt complex formation. The temperature dependent nature of ionic conductivity of the mixed-ion composite polymer electrolytes was determined by using conductivity meter (EC-035WP ERMA Inc, made in Japan). The ionic conductivity of the electrolyte was found in the range of 10-3 - 10-4 S/cm at room temperature.

     

     

  • References

    1. [1] L. Hollaway, Handbook of Polymer Composites for Engineers" Woodhead Publishing Company 1994. https://doi.org/10.1533/9781845698607.
      [2] P.K. Varshney and Shikha Gupta, Natural Polymer based electrolytes for electrochemical devices: a review, Ionics Volume 17 Issue 6 (2011) 479-483. https://doi.org/10.1007/s11581-011-0563-1.
      [3] N. Srivastava and Tuhina Tiwari, New trends in polymer electrolytes: a review, e-Polymers, No. 146 (2009).
      [4] R.C. Agrawal and G.P. Pandey, Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview, J. Phys. D: Appl. Phys. 41 (2008) 223001 (18pp).
      [5] M. Kurumova, D. Lopez, R. Benavente, C. Mijangos and J.M. Perena, Effect of crosslinking on mechanical and thermal properties of poly (vinyl alcohol), Polymer Vol. 419 (2000) 9265-9272. https://doi.org/10.1016/S0032-3861(00)00287-1.
      [6] A.A. Mohamad, N. S. Mohamad, M. Z. A. Yahya et al., Ionic conductivity studies of poly(vinyl alcohol) alkaline solid polymer electrolyte and its use in nickel-zinc cells, Solid State Ionics 156 (2003) 171-177. https://doi.org/10.1016/S0167-2738(02)00617-3.
      [7] S. Saito, Salt Effect on Polymer Solutions, Journal of Polymer Science: Part A-1 Vol. 7 (1969) 1789-1802. https://doi.org/10.1002/pol.1969.150070719.
      [8] U. Baishya and D. Sarkar, Structural and optical properties of zinc sulphide-polyvinyl alcohol (ZnS-PVA) nanocomposite thin films: effect of Zn source concentration, Bull. Mater. Sci., Vol. 34 No. 7 (2011) 1285-1288. https://doi.org/10.1007/s12034-011-0316-9.
      [9] F. Ahmad and E. Sheha, Preparation and physical properties of (PVA) 0.7(NaBr) 0.3(H3PO4) xM solid acid membrane for phosphoric acid - Fuel cells, Journal of Advanced Research 4 (2013) 155-161. https://doi.org/10.1016/j.jare.2012.05.001.
      [10] M. Belal Abdel-Samiea, Rania Gamal and Eslam M. Sheha, Effect of Succinonitrile on Electrical, Structural and Thermal Properties of PVA-Based Polymer Electrolyte for Magnesium Battery, Journal of Energy and Power Engineering 8 (2014) 1159-1165.
      [11] M. Deepa, N. Sharma, S. A. Agnihotry, R. Chandra and S. S. Sekhon, Effect of mixed salts on the properties of gel polymeric electrolytes, Solid State Ionics, Volume 148 (2002) 451-455. https://doi.org/10.1016/S0167-2738(02)00086-3.
      [12] S. Rajendran, M. Sivakumar and R. Subadevi, Li-ion conduction of plasticized PVA solid polymer electrolytes complexed with various lithium salts, Solid State Ionics Volume 167 (2004) 335-339. https://doi.org/10.1016/j.ssi.2004.01.020.
      [13] S. Rajendran and O. Mahendran, Experimental Investigations on Plasticized PMMA/PVA Polymer Blend Electrolytes. Ionics 7 (2001) 463-468. https://doi.org/10.1007/BF02373585.
      [14] R. Gamal, Eslam Sheha, Nabil Shash, and Mervat G. El-Shaarawy, Preparation and characterization of Mg2+ -ion conducting composite based on poly (vinyl alcohol) with various concentrations of Li2O, Mater. Express, Vol. 4 No. 4 (2014) 293-300. https://doi.org/10.1166/mex.2014.1178.
      [15] P. Joge, Dinesh Kumar Kanchan, Poonam Sharma and Nirali Gondaliya, Effect of nano-filler on electrical properties of PVA-PEO blend polymer electrolyte, Indian Journal of Pure & Applied Physics, Vol. 51 (2013) 350-353.
      [16] J. Naik, R.F. Bhajantri, T. Sheela and Sunil G. Rathod, Role of ZrO2 on Physico-Chemical Properties of PVA/NaClO4 Composites for Energy Storage Applications, Polymer Composites (2016) 1-10.
      [17] S. Rajendran, M. Shivakumar, R. Subadevi and M. Nirmala, Characterization of PVA-PVdF based solid polymer blend electrolytes, Physica B: Condensed Matter Volume 348 Issues 1-4 (2004) 73-78. https://doi.org/10.1016/j.physb.2003.11.073.
      [18] T. Sheela, R.F. Bhajantri, P.M.G. Nambissan et al., Ionic conductivity and free volume related microstructural properties of LiClO4/PVA/NaAlg polymer composites: Positron annihilation spectroscopic studies, Journal of Non-Crystalline Solids, Volume 454 (2016) 19-30. https://doi.org/10.1016/j.jnoncrysol.2016.10.010.
      [19] S. Gupta and Pradeep K. Varshney, Effect of plasticizer concentration on structural and electrical properties of hydroxyethyl cellulose (HEC)-based polymer electrolyte, Volume 23, Issue 6 (2017) 1613-1617.
      [20] N. Kanagathara, M.K. Marchewka, M. Drozd et al., FT-IR, FT-Raman spectra and DFT calculations of melaminium perchlorate monohydrate, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy Volume 112 (2013) 343-350. https://doi.org/10.1016/j.saa.2013.04.001.
      [21] Huang Sheng-Jian, Hoi-Kwan Lee and Won-Ho Kang, Proton Conducting Behavior of a Novel Composite Based on Phosphosilicate/Poly (Vinyl Alcohol), Journal of the Korean Ceramic Society, Volume 42 Issue 2 (2005) 77-80.
      [22] R.M. Hodge, G.H. Edward and G.P. Simon, Water absorption and states of water in semi crystalline poly (vinyl alcohol), Polymer Vol. 37 (1996) 1371-1376. https://doi.org/10.1016/0032-3861(96)81134-7.
      [23] P. Balaji Bhargav, V. Madhu Mohan, A.K. Sharma and V.V.R. Narasimha Rao, Investigations on electrical properties of (PVA:NaF) polymer electrolytes for electrochemical cell applications, Current Applied Physics, Vol. 9 (2009) 165-171. https://doi.org/10.1016/j.cap.2008.01.006.
      [24] R. Baskaran, S. Selvasekarapandian, N. Kuwata, J. Kawamura and T. Hattori, Structure, thermal and transport properties of PVAc-LiClO4 solid polymer electrolytes, J. Phys. Chem. Solids Vol. 68 (2007) 407-412. https://doi.org/10.1016/j.jpcs.2006.12.001.
      [25] Chin-Shen Lim, S. Rameshn and S.R. Majid, The effect of antimony trioxide on poly (vinyl alcohol)-lithium perchlorate based polymer electrolytes, Ceramics International 39 (2013) 745-752. https://doi.org/10.1016/j.ceramint.2012.06.087.
      [26] S. Srivastava and Pradeep K. Varshney, A structural study of mixed ion PVA based composite polymer electrolyte using X-ray diffraction studies, International Journal of Applied Engineering Research Volume 12 Number 11 (2017) 2926-2928.
      [27] F.M. Gray, Solid polymer electrolytes fundamentals and technological applications, VCH 1991.
      [28] N. Arora and S.S. Sekhon, Conductivity studies on lithium perchlorate containing liquid and gel electrolytes, Solid State Ionics (2000) 411-415. https://doi.org/10.1142/9789812791979_0063.
      [29] S.S. Sekhon, Rajiv Kumar and Boor Singh, Conductivity enhancement with polymer addition in non-aqueous polymer gel electrolytes, Solid State Ionics (2004) 911-922.

  • Downloads

  • How to Cite

    Srivastava, S., & K. Varshney, P. (2018). Conductivity and structural studies of PVA based mixed-ion composite polymer electrolytes. International Journal of Engineering & Technology, 7(2), 887-890. https://doi.org/10.14419/ijet.v7i2.12423