Real Time Environment Simulation through Virtual Reality

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    The primary objective of the work is to develop a simulation which changes its environment based on the outside environment. This is done by getting the input from the sensors and sending it to the cloud platform and then getting the sensor data into the simulation and changing the environment of it.The aim of the work is to design an embedded device which could collect sensor values of environment defining variables like pressure, temperature, altitude and amount of light and use it accordingly to change the environment of the simulation. This was achieved by constructing embedded device which relies on sensors to transmit the reading of environment defining factors to a cloud services provided by Thinkspeak platform. These reading are archived and can be accessed by the android application to change its environment.


  • Keywords


    .

  • References


      [1] A proposed combination of photogrammetry, Augmented Reality and Virtual Reality Headset for heritage visualization Edson Yahuda Putra; Andria K. Wahyudi; Charlie Dumingan 2016 International Conference on Informatics and Computing (ICIC)

      [2] NIVR: Neuro imaging in virtual reality Tyler Ard; David M. Krum; Thai Phan; Dominique Duncan; Ryan Essex; Mark Bolas; Arthur Toga,2017

      [3] Genesys: A Virtual Reality scene builder; Region 10 Conference (TENCON), 2016 IEEE;Joseph Daniel, Romelio P. Tavas, Rodolfo A. Aranzanso.

      [4] A new method of virtual reality based on Unity3D Geoinformatics, 2010 18th International Conference;Sa Wang , Zhengli Mao, ChanghaiZeng.

      [5] Virtual reality measurement tool: KinectMedVision Biomedical Engineering Meeting (BIYOMUT), 2016 20th National;SemihUtku, Mehmet HilalÖzcanhan

      [6] Design and development of CC3200-based CloudIoT for measuring humidity and temperatureDivyavaniPalle; ArunaKommu; RaghavendraRaoKanchi 2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)

      [7] IoT enabled environmental monitoring system for smart citiesJalpa Shah; Biswajit Mishra 2016 International Conference on Internet of Things and Applications (IOTA)

      [8] Development of a virtual reality simulator for robotic brain tumor resectionS. Heredia; M. M. Marinho; T. Ikemoto; K. Harada; M. Mitsuishi; M. Padilla; J. Marquez 2016 Inernational Symposium on Micro-NanoMechatronics and Human Science (MHS)

      [9] Explorations for real-time point cloud rendering of natural scenes in virtual reality Daniele BonattoSégolène Rogge; Arnaud Schenkel; Rudy Ercek; Gauthier Lafruit 2016 International Conference on 3D Imaging (IC3D)assignment.

      [10] S.V. Manikanthan , T. Padmapriya “An enhanced distributed evolved node-b architecture in 5G tele-communications network” International Journal of Engineering & Technology (UAE), Vol 7 Issues No (2.8) (2018) 248-254.March2018.

      [11] S.V.Manikanthan and D.Sugandhi “ Interference Alignment Techniques For Mimo Multicell Based On Relay Interference Broadcast Channel ” International Journal of Emerging Technology in Computer Science & Electronics (IJETCSE) ISSN: 0976-1353 Volume- 7 ,Issue 1 –MARCH 2014.

      [12] T. Padmapriya and V. Saminadan, “Improving Throughput for Downlink Multi user MIMO-LTE Advanced Networks using SINR approximation and Hierarchical CSI feedback”, International Journal of Mobile Design Network and Innovation- Inderscience Publisher, ISSN : 1744-2850 vol. 6, no.1, pp. 14-23, May 2015.


 

View

Download

Article ID: 12121
 
DOI: 10.14419/ijet.v7i2.24.12121




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.