Comparison of solid biofuels produced from olive pomace with two different conversion methods: torrefaction and hydrothermal carbonization

  • Authors

    • Selin Y. Gultekin
    • Hayati Olgun
    • Melih S. Celiktas
    2018-04-20
    https://doi.org/10.14419/ijet.v7i2.23.11903
  • Torrefaction, hydrothermal carbonization, olive pomace, fixed carbon, biomass
  • Olive pomace is a by-product of olive oil production process and has the potential to be a solid biofuel after thermal treatment. In this study, olive pomace was treated by two thermal conversion methods: hydrothermal carbonization (HTC) and torrefaction. Experiments were carried out under the temperature values of 250, 275, 300 and 350°C; reaction times of 10, 20 and 30 minutes for torrefaction and temperature values of 180, 200 and 220°C; reaction time of 2, 3 and 4 hours for HTC. Products with the same energy yield value (62 %)  obtained the higher heating values of 23.73 and 25.20 MJ/kg for torrefaction (275°C for 20 minutes) and hydrothermal carbonization (220°C for 2 hours), respectively. Hydrothermal carbonization method has the potential to produce chars at lower temperature values and without a drying process; and obtain products with improved higher heating values, energy yields and atomic O/C and H/C ratios compare to torrefaction products.

     

     
  • References

    1. [1] International Energy Agency. World Energy Outlook Executive Summary. France; 2016.

      [2] Liu Z, Han G (2005), Production of solid fuel biochar from waste biomass by low temperature pyrolysis. Fuel 65, 158-159.

      [3] Nhuchhen DR, Basu P, Acharya B. A Comprehensive Review on Biomass Torrefaction. International Journal of Renewable Energy & Biofuels Vol. 2014.

      [4] Bach QV, Tran KQ, Skreiberg Ø, Khalil RA, Phan AN (2014), Effects of wet torrefaction on reactivity and kinetics of wood under air combustion conditions. Fuel 137, 375-383.

      [5] Yan W, Perez S, Sheng K (2017), Upgrading fuel quality of moso bamboo via low temperature thermochemical treatments: Dry torrefaction and hydrothermal carbonization. Fuel 196, 473-480.

      [6] Gao Y, Wang X, Wang J, Li X, Cheng J, Yang H (2013), Effect of residence time on chemical and structural properties of hydrochar obtained by hydrothermal carbonization of water hyacinth. Energy 58, 376-383.

      [7] Bach QV, Skreiberg O (2016), Upgrading biomass fuels via wet torrefaction: A review and comparison with dry torrefaction. Renewable and Sustainable Energy Reviews 54, 665-677.

      [8] Kambo HS, Dutta A (2014), Strength, storage, and combustion characteristics of densified lignocellulosic biomass produced via torrefaction and hydrothermal carbonization. Applied Energy 135, 182-191.

      [9] Aktas ES, Imre S, Ersoy L (2001), Characterization and lime treatment of olive mill wastewater. Water. Res. 35, 2336-2340.

      [10] Chowdhury AKMMB, Konstantinou F, Damati A, Akratos CS, Vlastos D, Tekerlekopoulou AG, Vayenas DV (2015), Is physicochemical evaluation enough to characterize olive mill waste compost as soil amendment? The case of genotoxicity and cytotoxicity evaluation. Journal of Cleaner Production 93, 94-102.

      [11] Roig A, Cayuela ML, Sánchez-Monedero MA (2006), An overview on olive mill wastes and their valorisation methods. Waste Management 26, 960-969.

      [12] Niaounakis M, Halvadakis CP. Olive Mill Waste Management - Literature Review and Patent Survey. Typothito, George Dardanos Publications. Athens; 2004.

      [13] Kavroulakis N, Ntougias S (2010), Bacterial and β-proteobacterial diversity in Olea europaea var. mastoidis- and O. europaea var. koroneiki-generated olive mill wastewaters: influence of cultivation and harvesting practise on bacterial community structure. World J. Microbiol. Biotechnol. 27, 57-66.

      [14] Poerschmann J, Baskyr I, Weiner B, Koehler R, Wedwitschka H, Kopinke FD (2013), Hydrothermal carbonization of olive mill wastewater. Bioresource Technology 133, 581-588.

      [15] Benavente V, Fullana A (2015), Torrefaction of olive mill waste. Biomass and Bioenergy 73, 186-194.

      [16] Guizani C, Haddad K, Jeguirim M, Colin B, Limousy L (2016), Combustion characteristics and kinetics of torrefied olive pomace. Energy 107, 453-463.

      [17] Volpe M, Fiori L (2017), From olive waste to solid biofuel through hydrothermal carbonisation: The role of temperature and solid load on econdary char formation and hydrochar energy properties. Journal of Analytical and Applied Pyrolysis 124, 63-72.

      [18] Pala M, Kantarli IC, Buyukisik HB, Yanik J (2014), Hydrothermal carbonization and torrefaction of grape pomace: A comperative evaluation. Bioresource Technology 161, 255-262.

      [19] Wilk M, Magdziarz A (2017), Hydrothermal carbonization, torrefaction and slow pyrolysis of Mischantus giganteus. Energy 140(1), 1292-1304.

      [20] Liu Z, Quek A, Hoekman SK, Srinivasan MP, Balasubramanian R (2012), Thermogravimetric investigation of hydrochar-lignite co-combustion. Bioresour. Technol. 123, 646-652.

      [21] Bach QV, Tran KQ, Skreiberg Ø, Trinh TT (2015), Effects of wet torrefaction on pyrolysis of woody biomass fuels. Energy 88, 443-456.

      [22] Tremel A, Stemann J, Hermann M, Erlach B, Spliethoff H (2012), Entrained flow gasification of biocoal from hydrothermal carbonization. Fuel 102, 396-403.

      [23] Dai J, Sokhansanj S, Grace JR, Bi X, Lim CJ, Melin S (2008), Overview and some issues related to co-firing biomass and coal. Can. J. Chem. Eng. 86, 367-386.

      [24] Nachenius RW, van de Wardt TA, Ronsse F, Prins W (2015), Torrefaction of pine in a bench-scale screw conveyor reactor. Biomass and Bioenergy 79, 96-104.

      [25] Mei Y, Liu R, Yang Q, Yang H, Shao J, Draper C, Zhang S, Chen H (2015), Torrefaction of cedarwood in a pilot scale rotary kiln and the influence of industrial flue gas. Bioresource Technology 177, 355–360.

      [26] Prins MJ, Ptasinski KJ, Janssen FJJG (2006), More efficient biomass gasification via torrefaction. Energy 31, 3458–3470.

      [27] Ciolkosz D, Wallace R (2011), A review of torrefaction for bioenergy feedstock production. Biofuels, Bioproducts and Biorefining 5(3), 317-329.

      [28] Funke A, Ziegler F (2010), Hydrothermal carbonization of biomass: a summary and discussion of chemical mechanisms for process engineering. Biofuel. Bioprod. Bior. 4, 4160-4177.

      [29] Hoekman SK, Broch A, Robbins C (2011), Hydrothermal Carbonization (HTC) of Lignocellulosic Biomass. Energy Fuels 25, 1802-1810.

      [30] Lu X, Pellechia PJ, Flora JRV, Berge ND (2013), Influence of reaction time and temperature on product formation and characteristics associated with the hydrothermal carbonization of cellulose. Bioresource Technology 138, 180-190.

  • Downloads

  • How to Cite

    Y. Gultekin, S., Olgun, H., & S. Celiktas, M. (2018). Comparison of solid biofuels produced from olive pomace with two different conversion methods: torrefaction and hydrothermal carbonization. International Journal of Engineering & Technology, 7(2.23), 143-147. https://doi.org/10.14419/ijet.v7i2.23.11903